Brass hose couplings brass nut & tail

• Temperature and Working Pressure Ranges: From -40℉ to + 160℉ at 150 PSI maximum.

• Tolerance +/- .02 on all dimensions. Dimension Data can change without notice. Please callus when dimensions are critical.

Note: These fittings are intended for use with hose clamp, similar type clamp or a crimped ferrule.

• Assembly Instructions

1- Cut hose cleanly and squarely to length.

2- Slide clamp on hose.

3- Lubricate hose. Push hose on fitting until hose bottoms against stop ring or hex.

4- Position hose clamp as shown below and secure with a screwdriver or wrench. Maintain “A” dimension